EVAPro (model No. 2000E) and EELD601
1. Connect the Vacutec’s power cables to 12-Volt battery power.

2. Connect either to nitrogen (when testing EVAP) or shop air (for non-EVAP testing).
3. Use the accessories supplied to access the vehicle's EVAP system.
4. Connect the Vacutec’s smoke supply line to the system being tested.
5. Turn tester ON and in two minutes verify if a leak is present.
6. Look for the smoke exiting the leaks or the ultraviolet-activated fluorescent dye deposited at the exact location of a leak.

The Vacutec® Diagnostic Smoke™ Vapor Machines produce an OEM-approved vapor (smoke) from a specially formulated non-toxic, non-corrosive compound (UltraTraceUV®).  The introduction of this smoke into a closed system in a vehicle will almost immediately pin-point any and all leaks -- simply view the smoke exiting wherever there is a leak!  In addition, you will see the fluorescent dye deposited at the leak. And it's  all accomplished safely with the engine off!

The Vacutec’s smoke-solution should last for 500 tests and is user refillable.

 To purchase, click below or call.

admin@toolshackusa.com  (301) 412-1793

Patented in USA & Canada I Foreign & Other Patents Pending I Copyright © 2006 Worldwide Vapor, Inc. All Rights Reserved
VACUTEC is a registered trademark of Worldwide Vapor, Inc.
STAR EVAP-Approved Technology Licensee